Evaluation of the effect of the synthesis method on the performance of manganese spinel as cathode material in lithium-ion batteries

Ferley Alejandro Vásquez-Arroyave, Jorge Andrés Calderón-Gutiérrez, Jorge Enrique Thomas, Lina Maria Uribe-Grajales

Abstract


Spinel-structured lithium manganese oxide (LiMn2O4) has been successfully used as a cathode material for various lithium batteries. To improve the capacity and increase the discharge potential of the battery, transition metals are commonly added to the spinel as dopants or as a substitute for manganese. This can also confer stability on the structure of the cathode material. In this work, the production and performance of spinel LiMn2O4 (LMO) and LiNi0:5Mn1:5O4 (LNMO) by solid-state and sol-gel synthesis methods were studied. Synthetized (LMO) and (LNMO) materials were characterized by Raman spectroscopy and X-ray diffraction (XRD) to verify the formation of a spinel-like structure. It was corroborated that both synthesis methods can produce an adequate spine structure. SEM analyses showed that in general, spinel take an octahedral form. The particle size changes according to the synthesis method used. Lower particle sizes were obtained by sol-gel. The electrochemical characterization demonstrates that solid-state synthesis generates compounds with greater purity and crystallinity, which induces a greater capacity of lithium ion intercalation. The addition of nickel to the spinel increases the discharge potential of the cathode by 0.5V.


Keywords


Lithium-ion battery, Manganese spinel, Solid-state synthesis, Sol-gel, Elemental substitution

Full Text:

PDF

References


G. Rayner, Química Inorgánica Descriptiva, 2nd ed. México, D.F: Pearson Educación, 2000.

Y. S. Meng and M. E. A. Dompablo, “Recent advances in first principles computational research of cathode materials for lithium-ion batteries,” Acc. Chem. Res., vol. 46, no. 5, pp. 1171–1180, 2013.

G. B. Zhong, Y. Y. Wang, Y. Q. Yu, and C. H. Chen, “Electrochemical investigations of the lini0.45m0.10mn1.45o4 (m = fe, co, cr) 5v cathode materials for lithium ion batteries,” J. Power Sources, vol. 205, pp. 385–393, May 2012.

T. F. Yi, Y. Xie, Y. R. Zhu, R. S. Zhu, and M. F. Ye, “High rate micron-sized niobium-doped limn1.5ni0.5o4 as ultra high power positive-electrode material for lithium-ion batteries,” J. Power Sources, vol. 211, pp. 59–65, Aug. 2012.

J. H. Wesseling, E. M. Niesten, J. Faber, and M. P. Hekkert, “Business strategies of incumbents in the market for electric vehicles: Opportunities and incentives for sustainable innovation,” Bus. Strateg. Environ., vol. 24, no. 6, pp. 518–531, Dec. 2015.

D. L. Wood, J. Li, and D. Claus, “Prospects for reducing the processing cost of lithium ion batteries,” J. Power Sources, vol. 275, pp. 234–242, Feb. 2015.

Y. C. Jin, M. I. Lu, T. H. Wang, C. R. Yang, and J. G. Duh, “Synthesis of high-voltage spinel cathode material with tunable particle size and improved temperature durability for lithium ion battery,” J. Power Sources, vol. 262, pp. 483–487, Sep. 2014.

T. F. Yi, J. Mei, and Y. R. Zhu, “Key strategies for enhancing the cycling stability and rate capacity of LiNi0.5Mn1.5O4 as high-voltage cathode materials for high power lithium-ion batteries,” J. Power Sources, vol. 316, pp. 85–105, Jun. 2016.

L. C. et al., “Life modeling of a lithium ion cell with a spinel-based cathode,” J. Power Sources, vol. 221, pp. 191–200, Jan. 2013.

J. W. W. et al., “One-step synthesis and effect of heat-treatment on the structure and electrochemical properties of lini0.5Mn1.5O4 cathode material for lithium-ion batteries,” Electrochim. Acta, vol. 133, pp. 515–521, Jul. 2014.

X. Zhang, H. Zheng, V. Battaglia, and R. L. Axelbaum, “Flame synthesis of 5 v spinel-LiNi0.5Mn1.5O4 cathode-materials for lithium-ion rechargeable-batteries,” Proc. Combust. Inst., vol. 33, no. 2, pp. 1867–1874, 2011.

L. H. Chi, N. N. Dinh, S. Brutti, and B. Scrosati, “Synthesis, characterization and electrochemical properties of 4.8V LiNi0.5Mn1.5O4 cathode material in lithium-ion batteries,” Electrochim. Acta, vol. 55, no. 18, pp. 5110–5116, Jul. 2010.

C. Zhu, A. Nobuta, G. Saito, I. Nakatsugawa, and T. Akiyama, “Solution combustion synthesis of LiMn2 O4 fine powders for lithium ion batteries,” Adv. Powder Technol., vol. 25, no. 1, pp. 342–347, Jan. 2014.

E. H. et al., “Oxygen-Release-Related Thermal Stability and Decomposition Pathways of LixNi0.5Mn1.5o4 Cathode Materials,” Chem. Mater., vol. 26, no. 2, pp. 1108–1118, Dec. 2014.

Z. H. Chen, K. L. Huang, S. Q. Liu, and H. Y. Wang, “Preparation and characterization of spinel LiMn2O4 nanorods as lithium-ion battery cathodes,” Trans. Nonferrous Met. Soc. China, vol. 20, no. 12, pp. 2309–2313, Dec. 2010.

J. H. Kim, S. T. Myung, C. S. Yoon, S. G. Kang, and Y. K. Sun, “Comparative study of LiNi0.5Mn1.5O4-δ and LiNi0.5 Mn1.5 O4 Cathodes Having Two Crystallographic Structures: Fd3m and P4332,” Chem. Mater., vol. 16, pp. 906–914, Feb. 2004.

A. Manthiram, K. Chemelewski, and E. S. Lee, “A perspective on the high-voltage LiMn1.5Ni0.5O4 spinel cathode for lithium-ion batteries,” Energy Environ. Sci., vol. 7, no. 4, pp. 1339–1350, 2014.

Q. Zhong, A. Bonakclarpour, M. Zhang, Y. Gao, and J. R. Dahn, “Synthesis and electrochemistry of LiNix Mn2-xO4,” J. Electrochem. Soc., vol. 144, no. 1, pp. 205–213, 1997.

J. H. Kim, S. T. Myung, and Y. K. Sun, “Molten salt synthesis of LiNi0.5Mn1.5 O4 spinel for 5 V class cathode material of Li-ion secondary battery,” Electrochim. Acta, vol. 49, no. 2, pp. 219–227, Jan. 2004.

T. Yang, K. Sun, Z. Lei, N. Zhang, and Y. Lang, “The influence of holding time on the performance of LiNi0.5Mn1.5O4 cathode for lithium ion battery,” J. Alloys Compd., vol. 502, no. 1, pp. 215–219, Jul. 2010.

L. Wang, H. Li, X. Huang, and E. Baudrin, “A comparative study of Fd-3m and P4332 ‘LiNi0.5Mn1.5O4,” Solid State Ionics, vol. 193, no. 1, pp. 32–38, Jun. 2011.

J. S.rt al., “Role of oxygen vacancies on the performance of Li [Ni0.5−x Mn1.5+x] O4 (x = 0, 0.05, and 0.08) Spinel Cathodes for Lithium-Ion Batteries,” Chem. Mater., vol. 24, no. 15, pp. 3101–3109, Jul. 2012.

M. A. Kebede, N. Kunjuzwa, C. J. Jafta, M. K. Mathe, and K. I. Ozoemena, “Solution-combustion synthesized nickel-substituted spinel cathode materials (LiNixMn2-xO4 ; 0 ≤ x ≤ 0 . 2) for lithium ion battery: enhancing energy storage , capacity retention, and lithium ion transport,” Electrochim. Acta, vol. 128, pp. 172–177, May 2014.

H. W. Choi, S. J. Kim, Y. H. Rim, and Y. S. Yang, “Effect of Lithium Deficiency on Lithium-Ion Battery Cathode LixNi0.5Mn1.5O4,” J. Phys. Chem. C., vol. 119, no. 49, pp. 27 192–27 199, Nov. 2015.

G. C. Allen and M. Paul, “Chemical characterization of transition metal spinel-type oxides by infrared spectroscopy,” Appl. Spectrosc., vol. 49, no. 4, pp. 451–458, Apr. 1995.

B. Ammundsen, G. R. Burns, M. S. Islam, H. Kanoh, and J. Rozière, “Lattice dynamics and vibrational spectra of lithium manganese oxides : A computer simulation and spectroscopic study,” J. Phys. Chem. B, vol. 103, no. 25, pp. 5175–5180, Jun. 1999.

Y. Zhao, C. Ma, and Y. Li, “One-step microwave preparation of a Mn3O4 nanoparticles/exfoliated graphite composite as superior anode materials for Li-ion batteries,” Chem. Phys. Lett., vol. 673, pp. 19–23, Apr. 2017.

H. L. et al., “Morphological Evolution of High-Voltage Spinel LiNi0.5Mn1.5O4 Cathode Materials for Lithium-Ion Batteries: the Critical Effects of Surface Orientations and Particle Size,” ACS Appl. Mater. Interfaces, vol. 8, no. 7, pp. 4661–4675, Jun. 2016.

B. H. et al., “The effect of nanocrystallinity on the electrochemical performance of LiMn2O4 cathode syntetized by modified sol-gel method,” Solid State Ionics, vol. 262, no. 7, pp. 9–13, Sep. 2014.

C. M. Julien, F. Gendron, A. Amdouni, and M. Massot, “Lattice vibrations of materials for lithium rechargeable batteries. VI : Ordered spinels,” Mater. Sci. Eng. B, vol. 130, no. 7, pp. 41–48, Jun. 2006.

N. Amdouni, K. Zaghib, F. Gendron, a. Mauger, and C. M. Julien, “Structure and insertion properties of disordered and ordered LiNi0.5Mn1.5O4 spinels prepared by wet chemistry,” Ionics, vol. 12, no. 2, pp. 117–126, Jun. 2006.

J. Yang, X. Han, X. Zhang, F. Cheng, and J. Chen, “Spinel LiNi0.5Mn1.5O4 cathode for rechargeable lithiumion batteries: Nano vs micro, ordered phase (P4332) vs disordered phase (Fd3m),” Nano Res., vol. 6, no. 9, pp. 679–687, Sep. 2013.

C. M. Julien, M. Massot, and C. Poinsignon, “Lattice vibrations of manganese oxides part I . periodic structures,” Spectrochim. Acta, vol. 60, pp. 689––700, Feb. 2004.

T. F. Yi, Z. K. Fang, Y. Xie, Y. R. Zhu, and L. Y. Zang, “Synthesis of LiNi0.5Mn1.5O4 cathode with excellent fast chargedischarge performance for lithium-ion battery,” Electrochim. Acta, vol. 147, pp. 250–256, Nov. 2014.

H. Liu, R. Kloepsch, J. Wang, M. Winter, and J. Li, “Truncated octahedral LiNi0.5Mn1.5O4 cathode material for ultralong-life lithium-ion battery : Positive (100) surfaces in high-voltage spinel system,” J. Power Sources, vol. 300, pp. 430–437, Dec. 2015.

K. R. Chemelewski, E. S. Lee, W. Li, and A. Manthiram, “Factors Influencing the Electrochemical Properties of High-Voltage Spinel Cathodes: Relative Impact of Morphology and Cation Ordering,” Chemistry of Materials, vol. 25, no. 14, pp. 2890–2897, Jun. 2013.

S. H. Y. et al., “Improvement of the high-rate discharge capability of phosphate-doped spinel LiMn2O4 by a hydrothermal method,” Electrochim. Acta, vol. 55, no. 8, pp. 2972–2977, Mar. 2010.

J. M. Tarascon and D. Guyomard, “Li metal-free rechargeable batteries based on Li1+xMn204 Cathodes (0

D. L. et al., “Spinel materials for high-voltage cathodes in Li-ion batteries,” RSC Adv., vol. 4, pp. 154–167, Nov. 2014.

M. Hu, X. L. Pang, and Z. Zhou, “Recent progress in high-voltage lithium ion batteries,” AJ. Power Sources, pp. 229–242, Sep. 2013.

P. G. et al., “Microwave rapid preparation of LiNi0.5Mn1.5O4 and the improved high rate performance for lithium-ion batteries,” Electrochim. Acta, vol. 100, pp. 125–132, Jun. 2013.

A. C. et al., “ LiNi0.5Mn1.5O4 t hick-film electrodes prepared by electrophoretic deposition f or use i n high voltage l ithium-ion batteries,” J. Power Sources, vol. 158, no. 1, pp. 583–590, Jul. 2006.

Y. H. I. et al., “Epitaxial growth of LiMn2O4 Thin Films by Chemical Solution Deposition for Multilayer Lithium-Ion Batteries,” J. Phys. Chem. C, vol. 118, no. 34, pp. 19 540–19 547, Aug. 2014.

C. J. Jafta, M. K. Mathe, N. Manyala, W. D. Roos, and K. I. Ozoemena, “Microwave-Assisted Synthesis of High-Voltage Nanostructured LiMn1.5Ni0.5O4 Spinel: Tuning the Mn3+ Content and Electrochemical Performance,” ACS Appl. Mater. Interfaces, vol. 5, no. 15, pp. 7592–7598, Jul. 2013.

K. Amine, H. Tukamot, H. Yasuda, and Y. Fujita, “Preparation and electrochemical investigation of LiMn2-xMexO4 (Me: Ni, Fe, and x = 0.5, 1) cathode materials for secondary lithium batteries,” J. Power Sources, vol. 68, no. 2, pp. 604–608, Oct. 1997.

H. Z. et al., “Preparation and Characterization of Ultralong Spinel Lithium Manganese Oxide Nanofiber Cathode via Electrospinning Method,” Electrochim. Acta, vol. 152, no. 25, pp. 274–279, Jan. 2015.

X. X. et al., “Synthesis of single-crystalline spinel LiMn2O4 Nanorods for lithium-ion batteries with high rate capability and long cycle life,” Chem. - A Eur. J., vol. 20, no. 51, pp. 217 125––17 131, Oct. 2014.

Q. C. Z. et al., “An Electrochemical Impedance Spectroscopic Study of the Electronic and Ionic Transport Properties of Spinel LiMn2O4,” J. Phys. Chem., vol. 114, no. 18, pp. 8614–8621, Apr. 2010.

J. Bisquert, G. Garcia, F. Fabregat, and P. R. Bueno, “Theoretical models for ac impedance of finite diffusion layers exhibiting low frequency dispersion,” J. Electroanal. Chem., vol. 475, no. 2, pp. 152–163, Oct. 1999.

B. H. et al., “Determination of effective capacitance and film thickness from constant-phase-element parameters,” Electrochim. Acta J., vol. 55, no. 21, pp. 6218–6227, Aug. 2010.

F. C. et al., “Enhanced electrochemical performances of 5 V spinel LiMn1.58Ni0.42O4 cathode materials by coating with LiAlO2,” J. Power Sources, vol. 239, pp. 181–188, Oct. 2013.

M. M. et al., “Improved cycling and rate performance of sm-doped LiNi0.5Mn1.5O4 cathode materials for 5 v lithium ion batteries,” Appl. Surf. Sci., vol. 290, pp. 412–418, Jan. 2014.

H. W. et al., “Excellent stability of spinel LiMn2O4-based cathode materials for lithium-ion batteries„” Electrochim. Acta, vol. 177, pp. 290–297, Sep. 2015.

M. Kunduraci, J. F. Sharab, G. G. Amatucci, and Other, “High-Power nanostructured LiMn2 - xNixO4 High-Voltage Lithium-Ion Battery Electrode Materials : Electrochemical Impact of Electronic Conductivity and Morphology,” Chem. Mater, vol. 18, no. 15, pp. 3585–3592, Jul. 2006.

M. Kunduraci, J. F. Sharab, and G. G. Amatucci, “High Rate Micron-Sized Ordered LiNi0.5Mn1.5O4,” J. Electrochem. Soc, vol. 157, no. 8, pp. 925–931, Jun. 2010.




DOI: https://doi.org/10.17533/udea.redin.n87a06 Abstract : 2823 PDF : 248

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Esta publicación hace parte del Sistema de Revistas de la Universidad de Antioquia
¿Quieres aprender a usar el Open Journal system? Ingresa al Curso virtual
Este sistema es administrado por el Programa Integración de Tecnologías a la Docencia
Universidad de Antioquia
Powered by Public Knowledge Project