Model for microhardness profile prediction of annealed AISI 1045 steel cylindrical bars subjected to torsion

Veronica Carmen Di Graci-Tiralongo, Omar José Zurita-Hurtado, Maria Cristina Capace-Aguirre

Abstract


In this work, the effect of the torsion process angle of twist and distance from the center of cylindrical bars on the microhardness profile of annealed AISI 1045 steel was studied. The results showed that the microhardness increase with the evaluated parameters and the hardening is related to the plastic deformation caused by the process rather than by microstructural transformations. Based on the experimental results, ANOVA-Pareto analysis was conducted proving that the angle of twist is the most influential control factor (59.35 %) among the parameters investigated. Finally, a model to predict the microhardness profile from the torsion process is presented.

 


Keywords


AISI 1045, ANOVA, microhardness, torsion

Full Text:

PDF

References


M.Suraratchai, J.Limido, C.Mabru, and R.Chieragatti, “Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy,” Int. J. Fatigue, vol. 30, no. 12, pp. 2119–2126, Dec. 2008.

N. Shamsaei and A. Fatemi, “Deformation and fatigue behaviors of case-hardened steels in torsion: Experiments and predictions,” Int. J. Fatigue, vol. 31, no. 8-9, pp. 1386–1396, Aug. 2009.

“Deformation and fatigue behaviors of carburized automotive gear steel and predictions,” Frattura Integr. Strutt, vol. 37, pp. 28–37, 2016.

J. Schijve, Fatigue of structures and materials, 2nd ed. Springe Netherlands, 2009.

H. Huang, Z. Wang, X. Yong, and K. Lu, “Enhancing torsion fatigue behaviour of a martensitic stainless steel by generating gradient nanograined layer via surface mechanical grinding treatment,” Mater. Sci. Techn., vol. 29, no. 10, pp. 1200–1205, Nov. 2013.

J. C. Villegas and et al, “Enhanced fatigue resistance of a nickelbased hastelloy induced by a surface nanocrystallization and hardening process,” Philosophical Magazine Letters, vol. 85, no. 8, pp. 427– 438, 2005.

K. Dai and L. Shaw, “Analysis of fatigue resistance improvements via surface severe plastic deformation,” Int. J. Fatigue, vol. 30, no. 8, pp. 1398–1408, Aug. 2008.

J. M. Gere and S. P. Timoshenko, Mechanics of Materials, 4th ed. Cheltenham, UK: Stanley Thornes, 1999.

G. E. Dieter, Mechanical Metallurgy, 3rd ed. New York: McGraw-Hill Education, 1986.

S. G. Hussein, “An experimental study of the effects of coolant fluid on surface roughness in turning operation for brass alloy,” J. Eng., vol. 20, no. 3, pp. 96–104, 2014.

D. Deepak and B. Rajendra, “Investigations on the surface roughness produced in turning of Al6061 (As-Cast) by Taguchi method,” Int. J. Eng. Res. Techn, vol. 4, no. 8, pp. 295–298, Aug. 2015.

H. Sasahara, “The effect on fatigue life of residual stress and surface hardness resulting from different cutting conditions of 0.45vol. 45, pp. 131–136, Feb. 2005.

Standard Guide for Preparation of Metallographic Specimens, ASTM E3-11, 2011.

Standard Test Method for Knoop and Vickers Hardness of Materials, ASTM International-ASTM E384-11, 2011.

D. C. Montgomery, E. A. Peck, and G. G. Vining, Introduction to Linear Regression Analysis. USA: Wiley, 2012.

D. C. P. and et al., “Mechanical property evaluation of an Al-2024 alloy subjected to HPT processing,” IOP Conference Series: Materials Science and Engineering, vol. 63, no. 1, pp. 1–9, 2014.

E. El-Danaf and et al., “Mechanical properties and microstructure evolution in an aluminum 6082 alloy processed by high-pressure torsion,” Journal of Materials Science, vol. 49, no. 19, pp. 6597–6607, Oct. 2014.

D. Peña, Estadística; modelos y métodos, 2nd ed. Tonawanda, NY: Broadview Press, 2013.




DOI: https://doi.org/10.17533/udea.redin.n89a09 Abstract : 90 PDF : 109

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Esta publicación hace parte del Sistema de Revistas de la Universidad de Antioquia
¿Quieres aprender a usar el Open Journal system? Ingresa al Curso virtual
Este sistema es administrado por el Programa Integración de Tecnologías a la Docencia
Universidad de Antioquia
Powered by Public Knowledge Project