Fibre reinforced concrete containing waste coconut shell aggregate, fly ash and polypropylene fibre

Ramaiah Prakash, Rajagopal Thenmozhi, Sudharshan N. Raman, Chidambaram Subramanian

Abstract


The aim of this study is to investigate the effect of polypropylene fibre addition into eco-concrete made with fly ash, an industrial by product, as partial cement replacement material, and coconut shell, an agricultural waste,  as coarse aggregates, on the mechanical properties of the concrete. Two different mixes were developed, one with coconut shell only as coarse aggregates, and the other with the combination of both conventional aggregates and coconut shell as coarse aggregates. The cement content was replaced with class F fly ash at 10% by weight in the concrete mixes. The volume fractions of polypropylene fibres used in this study were 0.25%, 0.5%, 0.75% and 1.0%. The addition of polypropylene fibres slightly reduces the slump and density of coconut shell concrete. As the volume fraction of fibres increases, the compressive strength and modulus of elasticity of coconut shell concrete also increases by up to 0.5% of fibre volume fraction. The split tensile strength and flexural strength of coconut shell concrete were also enhanced with fibre addition. The addition of 0.75% and 1.0% volume fractions of polypropylene fibres slightly reduces compressive strength. Results of this study show that polypropylene fibres may be used in coconut shell concrete to improve the mechanical properties of the composite.


Keywords


Coconut shell; fly ash; sustainability; polypropylene fibre; fibre reinforced coconut shell concrete; compressive strength; split tensile; flexural strength; modulus of elasticity.

Full Text:

PDF

References


A. A. Ramezanianpour, M. M. Khani, and G. Ahmadibeni, “The effect of rice husk ash on mechanical properties and durability of sustainable concretes,” International Journal of Civil Engineering, vol. 7, no. 2, pp. 83–91, Jun. 2009.

M. Ali, “Coconut fibre: a versatile material and its applications in engineering,” Journal of Civil Engineering and Construction Technology, vol. 2, no. 9, pp. 189–97, Sep. 2011.

K. H. Mo, T. S. Chin, U. J. Alengaram, and M. Z. Jumaat, “Material and structural properties of waste-oil palm shell concrete incorporating ground granulated blast-furnace slag reinforced with low-volume steel fibres,” Journal of Cleaner Production, vol. 133, pp. 414–426, Oct. 2016.

Ministry of Agriculture and Farmer’s Welfare. Coconut development board. Accessed Nov. 15, 2018. [Online]. Available: http://www. coconutboard.nic.in

C. Meyer, “The greening of the concrete industry,” Cement and Concrete Composites, vol. 31, no. 8, pp. 601–605, Sep. 2019.

L. M. Federico and S. E. Chidiac, “Waste glass as a supplementary cementitious material in concrete – critical review of treatment methods,” Cement and Concrete Composites, vol. 31, no. 8, pp. 606–610, Sep. 2019.

U. J. Alengaram, B. A. A. Muhit, and M. Z. B. Jumaat, “Utilization of oil palm kernel shell as lightweight aggregate in concrete – a review,” Construction and Building Materials, vol. 38, pp. 161–172, Jan. 2013.

R. Prakash, R. Thenmozhi, and S. N. Raman, “Mechanical characterization and flexural performance of eco-friendly concrete produced with fly ash as cement replacement and coconut shell coarse aggregate,” unpublished.

K. Gunasekaran, P. Kumar, and M. Lakshmipathy, “Mechanical and bond properties of coconut shell concrete,” Construction and Building Materials, vol. 25, no. 1, pp. 92–98, Jan. 2011.

H. B. Basri, M. A. Mannan, and M. F. M. Zain, “Concrete using waste oil palm shells as aggregate,” Cement and Concrete Research, vol. 29, no. 4, pp. 619–622, 1999.

K. Gunasekaran, R. Annadurai, and S. Kumar, “A study on some durability properties of coconut shell aggregate concrete,” Materials and Structures, vol. 48, no. 5, pp. 1253–1264, May 2013.

K. Gunasekaran, R. Ramasubramani, R. Annadurai, and S. P. Chandar, “Study on reinforced lightweight coconut shell concrete beam behavior under torsion,” Materials Design, vol. 57, pp. 374–382, May 2014.

A. J. Prithika and S. Sekar, “Mechanical and fracture characteristics of eco-friendly concrete produced using coconut shell, ground granulated blast furnace slag and manufactured sand,” Construction and Building Materials, vol. 103, pp. 1–7, Jan. 2016.

P. Dinakar, K. G. Babu, and M. Santhanam, “Durability properties of high volume fly ash self compacting concretes,” Cement and Concrete Composites, vol. 30, no. 10, pp. 880–886, Nov. 2008.

K. H. Mo, U. J. Alengaram, M. Z. Jumaat, M. Y. Jing, and J. Lim, “Assessing some durability properties of sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand,” Journal of Cleaner Production, vol. 112, pp. 763–770, Jan. 2016.

P. Shafigh, H. Mahmud, and M. Z. Jumaat, “Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete,” Materials Design, vol. 32, no. 7, pp. 3926–3932, Aug. 2011.

S. P. Yap, U. J. Alengaram, and M. Z. Jumaat, “Enhancement of mechanical properties in polypropylene– and nylon–fibre reinforced oil palm shell concrete,” Materials Design, vol. 49, pp. 1034–1041, Aug. 2013.

S. Poh, C. Hooi, U. J. Alengaram, K. Hung, and M. Zamin, “Flexural toughness characteristics of steel–polypropylene hybrid fibre-reinforced oil palm shell concrete,” Materials Design, vol. 57, pp. 652–659, May 2014.

M. K. Yew, H. B. Mahmud, B. C. Ang, and M. C. Yew, “Influence of different types of polypropylene fibre on the mechanical properties of high-strength oil palm shell lightweight concrete,” Construction and Building Materials, vol. 90, pp. 36–43, 2015.

P. R. K. Chakravarthy, R. Janani, T. Ilango, and K. Dharani, “Properties of concrete partially replaced with coconut shell as coarse aggregate and steel fibres in addition to its concrete volume,” IOP Conference Series: Materials Science and Engineering, vol. 183, Mar. 2017.

V. M. Shrestha, S. Anandh, and S. S. Nachiar, “Experimental study on the strength parameter of quarry dust mixed coconut shell concrete adding coconut fibre,” IOP Conference Series: Earth and Environmental Science, vol. 80, Jul. 2017.

Specification for 53 grade ordinary Portland cement, IS 12269, 2013.

N. A. Memon, S. R. Sumadi, and M. Ramli, “Performance of high wokability slag-cement mortar for ferrocement,” Building and Environment, vol. 42, no. 7, pp. 2710–2717, Jul. 2007.

H. Mazaheripour, S. Ghanbarpour, S. Mirmoradi, and I. Hosseinpour, “The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete,” Construction and Building Materials, vol. 25, no. 1, pp. 351 – 358, Jan. 2011.

E. T. Dawood and M. Ramli, “Flowable high-strength system as repair material,” Structural Concrete, vol. 11, no. 4, pp. 199–209, Dec. 2010.

G. Lu, K. Wang, and T. J. Rudolphi, “Modeling rheological behavior of highly flowable mortar using concepts of particle and fluid mechanics,” Cement and Concrete Composites, vol. 30, no. 1, pp. 1–12, Jan. 2008.

P. K. Mehta and P. J. M. Monteiro, Concrete: Microstructure, Properties and Materials, 3rd ed. McGraw-Hill Companies, 2006.

A. Al-Harthy, M. A. Halim, R. Taha, and K. Al-Jabri, “The properties of concrete made with fine dune sand,” Construction and Building Materials, vol. 21, no. 8, pp. 1803–1808, Aug. 2007.

J. Newman and P. Owens, Properties of Lightweight Concrete, in Advanced Concrete Technology: Concrete Properties. Oxford: Butterworth-Heinemann, 2003.

K. Gunasekaran, R. Annadurai, and P. Kumar, “Study on reinforced lightweight coconut shell concrete beam behavior under flexure,” Materials Design, vol. 46, pp. 157–167, Apr. 2013.

S. Kakooei, H. M. Akil, M. Jamshidi, and J. Rouhi, “The effects of polypropylene fibers on the properties of reinforced concrete structures,” Construction and Building Materials, vol. 27, no. 1, pp. 73–77, Feb. 2012.

A. M. Neville, Properties of Concrete, 5th ed. Essex, Inglaterra: Pearson Education Limited, 2011.

Z. Li, Advanced concrete technology. John Wiley Sons, Inc., 2011.

P. Balaguru and A. Foden, “Properties of fiber reinforced structural lightweight concrete,” ACI Structural Journal, vol. 93, no. 1, pp. 62–77, Jan. 1996.

P. Balaguru and M. G. Dipsia, “Properties of fiber reinforced high-strength semi-lightweight concrete,” ACI Materials Journal, vol. 90, no. 5, pp. 399–405, Jan. 1993.

A. M. Neville and J. J. Brooks, Concrete Technology, 2nd ed. Prentice-Hall, 2010.




DOI: https://doi.org/10.17533/10.17533/udea.redin.20190403 Abstract : 238 PDF : 134

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Esta publicación hace parte del Sistema de Revistas de la Universidad de Antioquia
¿Quieres aprender a usar el Open Journal system? Ingresa al Curso virtual
Este sistema es administrado por el Programa Integración de Tecnologías a la Docencia
Universidad de Antioquia
Powered by Public Knowledge Project