Effect of cobalt content on non-isothermal crystallization kinetics of Fe-based amorphous alloys

Carolina Parra-Velásquez, Darling Perea-Cabarcas, Francisco Javier Bolivar-Osorio

Abstract


In the present study, FeSiBP and FeCoSiBP ribbons with a fully amorphous structure were made by melt spinning technique. A detailed analysis of the isochronal crystallization behavior is presented in this paper. The influence of cobalt on the crystallization kinetics of the alloys was studied under isochronal conditions using differential scanning calorimetry (DSC). Apparent and local activation energy values were determined by Kissinger, Ozawa and Kissinger-Akahira-Sunose (KAS) methods. The results indicate that appropriate amounts of cobalt can significantly enhance the thermal stability of Fe-based alloys, through an increase in nucleation activation energy from 538kJ/mol to 701kJ/mol, obtained by Kissinger method. Furthermore, with the method proposed by Matusita, it was possible to obtain global values for the Avrami exponent, noting that from a general perspective, Co changes the mechanism from diffusion controlled to interface controlled. This leads to the conclusion that the crystallization process is complex and takes place in more than one stage. Therefore, the determination of nucleation mechanisms and dimensional growth is difficult due to the inapplicability of the Johnson-Melh-Avrami (JMA) model. As such, a study under isothermal conditions is suggested, in order to achieve a full understanding of the mechanisms involved.


Keywords


Isochronal crystallization; activation energy; Avrami exponent; nucleation and growth mechanisms

Full Text:

PDF

References


Metglas(R) Inc. (2016) Amorphous metal distribution transformers. [Online]. Available: https://bit.ly/2WZMSN3

V. Franco and O. Gutfleisch, “Magnetic materials for energy applications,” J. Miner. Met. Mater. Soc., vol. 64, no. 7, June 29 2012. [Online]. Available: https://doi.org/10.1007/s11837-012-0348-7

L. J. Wang, J. Q. Li, and H. J. Wang, “Application of nanocrystalline magnetic materials in electromechanical devices,” Mater. Sci. Forum, vol. 694, July 27 2011. [Online]. Available: https://doi.org/10. 4028/www.scientific.net/MSF.694.341

A. H. Taghvaei and J. Eckert, “A comparative study on the isochronal and isothermal crystallization kinetics of Co46.45Fe25.55Ta8B20 soft magnetic metallic glass with high thermal stability,” J. Alloys Compd., vol. 675, August 2016. [Online]. Available: https://doi.org/ 10.1016/j.jallcom.2016.03.053

S. D. Kaloshkin and I. A. Tomilin, “The crystallization kinetics of amorphous alloys,” Thermochim. Acta, vol. 280-281, July 1996. [Online]. Available: https://doi.org/10.1016/0040-6031(96)02926-7

J. Malek, “Kinetic analysis of crystallization processes in amorphous materials,” Thermochim. Acta, vol. 355, no. 1-2, July 2000. [Online]. Available: https://doi.org/10.1016/S0040-6031(00)00449-4

B. Vishwanadh, D. Srivastava, R. Balasubramaniam, and G. K. Dey, “A study on synthesis, crystallization, and magnetic behavior ofnanocrystalline Fe-Based metallic glasses,” Metall. Mater. Trans. A, vol. 39, no. 7, pp. 1560–1572, Jul. 2008.

Y. Ma, B. Rheingans, F. Liu, and E. J. Mittemeijer, “Isochronal crystallization kinetics of Fe40Ni40B20 amorphous alloy,” J. Mater. Sci., vol. 48, no. 16, pp. 5596–5606, Aug. 2013.

Q. P. Cao and et al., “Isochronal crystallization kinetics of Cu60Zr20Ti20 bulk metallic glass,” J. Non. Cryst. Solids, vol. 357, no. 3, February 2011. [Online]. Available: https://doi.org/10.1016/j.jnoncrysol.2010.10.030

T. Paul, A. Loganathan, A. Agarwal, and S. P. Harimkar, “Kinetics of isochronal crystallization in a Fe-based amorphous alloy,” J. Alloys Compd., vol. 753, July 2018. [Online]. Available: https: //doi.org/10.1016/j.jallcom.2018.04.133

T. Ozawa, “Kinetic analysis of derivative curves in thermal analysis,” J. Therm. Anal., vol. 2, no. 3, pp. 301–324, Sep. 1970.

J. Vázquez, C. Wagner, P. Villares, and R. Jiménez, “A theoretical method for determining the crystallized fraction and kinetic parameters by DSC, using non-isothermal techniques,” Acta Mater., vol. 44, no. 12, December 1996. [Online]. Available: https://doi.org/10.1016/S1359-6454(96)00127-9

T. Gheiratmand and et al., “Effect of annealing on soft magnetic behavior of nanostructured (Fe0.5Co0.5)73.5Si13.5B9Nb3Cu1 ribbons,” J. Alloys Compd., vol. 582, January 2014. [Online]. Available: https://doi.org/10.1016/j.jallcom.2013.08.038

H. Wei and et al., “Crystallization kinetics of (Ni0.75Fe0.25)78Si10B12 amorphous alloy,” J. Non. Cryst. Solids, vol. 354, no. 17, April 2008. [Online]. Available: https://doi.org/10.1016/j.jnoncrysol.2007.10.009

H. E. Kissinger, “Reaction kinetics in differential thermal analysis,” Anal. Chem., vol. 29, no. 11, November 01 1957. [Online]. Available: https://doi.org/10.1021/ac60131a045

Z. F. Yao, J. C. Qiao, C. Zhang, J. M. Pelletier, and Y. Yao, “Non-isothermal crystallization transformation kinetics analysis and isothermal crystallization kinetics in super-cooled liquid region (SLR) of (Ce0.72Cu0.28)90 − xAl10Fex (x = 0, 5 or 10) bulk metallic glasses,” J. Non. Cryst. Solids, vol. 415, May 2015. [Online]. Available: https://doi.org/10.1016/j.jnoncrysol.2015.02.017

P. Rezaei, A. Seifoddini, and S. Hasani, “Thermal stability and crystallization process in a Fe-based bulk amorphous alloy: The kinetic analysis,” J. Non. Cryst. Solids, vol. 471, September 2017. [Online]. Available: https://doi.org/10.1016/j.jnoncrysol.2017.05.044

A. Pratap and A. T. Patel, “Crystallization kinetics of metallic glasses,” in Advances in Crystallization Processes, Y. Mastai, Ed. Shanghai, China: InTech, 2012, pp. 107–126.

J. C. Qiao and J. M. Pelletier, “Crystallization kinetics in Cu46Zr45Al7Y2 bulk metallic glass by differential scanning calorimetry (DSC),” J. Non. Cryst. Solids, vol. 357, no. 14, July 2011. [Online]. Available: https://doi.org/10.1016/j.jnoncrysol.2010.12.071

D. W. Henderson, “Thermal analysis of non-isothermal crystallization kinetics in glass forming liquids,” J. Non. Cryst. Solids, vol. 30, no. 3, January 1979. [Online]. Available: https://doi.org/10.1016/0022-3093(79)90169-8

Y. Zhi, D. Shu, W. Xiang, and L. Pei, “Applicability of johnsonmehl- avrami model to crystallization kinetics of Zr60Al15Ni25 bulk amorphous alloy,” Trans. Nonferrous Met. Soc. China, vol. 18, no. 1, February 2008. [Online]. Available: https://doi.org/10.1016/ S1003-6326(08)60025-4

A. H. Moharram, A. M. Abdel, and F. S. Shokr, “Crystallization kinetics of the Se80Te15Sb5 glass,” Chalcogenide Lett., vol. 13, no. 9, pp. 435–442, Sep. 2016.

K. Matusita, T. Komatsu, and R. Yokota, “Kinetics of non-isothermal crystallization process and activation energy for crystal growth in amorphous materials,” J. Mater. Sci., vol. 19, no. 1, May 1984. [Online]. Available: https://doi.org/10.1007/BF02403137

R. Li and et al., “Crystallization and magnetic properties of [(Fe,Co)0.75Si0.05B0.20]94Nb6 metallic glasses,” J. Phys. D. Appl. Phys., vol. 42, no. 8, April 01 2009. [Online]. Available: https: //doi.org/10.1088/0022-3727/42/8/085006

C. Suryanarayana and A. Inoue, “Synthesis of bulk metallic glasses,” in Bulk Metallic Glasses, C. Suryanarayana and A. Inoue, Ed. New York, USA: CRC Press, 2011, pp. 145–186.

Z. Jamili, M. Haddad, J. Vahdati, and Y. Ke, “Thermal behavior and non-isothermal crystallization kinetics of (Ti41Zr25Be28Fe6)93Cu7 bulk metallic glass,” J. Non. Cryst. Solids, vol. 447, September 01 2016. [Online]. Available: https://doi.org/10.1016/j.jnoncrysol.2016. 05.043




DOI: https://doi.org/10.17533/10.17533/udea.redin.20190735 Abstract : 188 PDF : 148

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Esta publicación hace parte del Sistema de Revistas de la Universidad de Antioquia
¿Quieres aprender a usar el Open Journal system? Ingresa al Curso virtual
Este sistema es administrado por el Programa Integración de Tecnologías a la Docencia
Universidad de Antioquia
Powered by Public Knowledge Project