Design of a load carriage system oriented to reduce acceleration forces when carrying a backpack

Camilo Eduardo Pérez-Cualtán, Oscar Iván Campo-Salazar

Abstract


In military life, load carriage is an unavoidable part of field operations which is the reason why soldiers often make use of a military backpack. Infantry soldiers usually carry loads weighting more than 30% of their body weight. When the soldier carries a certain weight, his energy expenditure increases, which causes a reduction in performance. The transported load has a movement similar to the vertical displacement of the center of mass of the soldier while walking. This leads to a significant increase in the acceleration forces generated by the action of said load on the body which explains the increase in energy expenditure. The objective of this project was to develop a load carriage system that suspends the load and reduces its vertical displacement. Results show a reduction in both the vertical excursion of the load and in the total vertical ground reaction force when carrying a load with the developed prototype, with respect to the conventional military backpack.


Keywords


Biomechanics; backpack; suspended load

Full Text:

PDF

References


J. J. Knapik, K. L. Reynolds, and E. Harman, “Soldier load carriage: Historical,physiological,biomechanical, and medical aspects,” Mil. Med., vol. 169, no. 1, January 2004. [Online]. Available: https: //doi.org/10.7205/milmed.169.1.45

E. Harman, K. Hoon, P. Frykman, and C. Pandorf, “The effects of backpack weight on the biomechanics of load carriage,” Army Research Institute of Environmental Medicine Military Performance Division, Natick, U.S., Tech. Rep. ADA377886, May 2000.

S. A. Birrell, R. H. Hooper, and R. A. Haslam, “The effect of military load carriage on ground reaction forces,” Gait Posture, vol. 26, no. 4, October 2007. [Online]. Available: https://doi.org/10.1016/j.gaitpost. 2006.12.008

J. F. Seay, “Biomechanics of load carriage,” in The Mechanobiology and Mechanophysiology of Military-Related Injuries, A. Gefen and Y. Epstein, Eds. New York, USA: Springer, 2016, pp. 71–106.

S. A. Gard, S. C. Miff, and A. D. Kuo, “Comparison of kinematic and kinetic methods for computing the vertical motion of the body center of mass during walking,” Hum. Mov. Sci., vol. 22, no. 6, April 2004. [Online]. Available: https://doi.org/10.1016/j.humov.2003.11.002

T. W. Huang and A. D. Kuo, “Mechanics and energetics of load carriage during human walking,” J. Exp. Biol., vol. 217, no. 4, February 2014. [Online]. Available: https://doi.org/10.1242/jeb.091587

L. C. Rome, L. Flynn, and T. D. Yoo, “Rubber bands reduce the cost of carrying loads,” Nature, vol. 444, pp. 1023–1024, 2006.

M. Foisssac, G. Y. Millet, A. Geyssant, P. Freychat, and A. Belli, “Characterization of the mechanical properties of backpacks and their influence on the energetics of walking,” J. Biomech., vol. 42, no. 2, January 2009. [Online]. Available: https://doi.org/10.1016/j. jbiomech.2008.10.012

J. B. Saunders, V. T. Inman, and H. D. Eberhart, “The major determinants in normal and pathological gait,” J Bone Joint Surg Am., vol. 35-A, no. 3, pp. 543–558, Jul. 1953.

J. Ackerman and J. Seipel, “A model of human walking with an elastically-suspended load,” J Biomech., vol. 47, no. 8, June 03 2014. [Online]. Available: https://doi.org/10.1016/j.jbiomech.2014.03.016

X. Xu, “An investigation on the interactivity between suspended-load backpack and human gait,” PhD dissertation, Department of Industrial and Systems Engineering, North Carolina State University, Raleigh, EE.UU, 2008.

N. K. Putra, Suprijanto, and A. B. Sriwarno, “Dynamic modeling and simulation of the suspended-load backpack to obtain optimal suspension parameters and reducing effect of ground reaction force,” in 6th World Congress of Biomechanics (WCB 2010), Singapore, Asia, 2010, pp. 111–114.

M. J. Atherden, “Formula sae shock absorber design,” M.S. thesis, School of Engineering, The University of Queesnland, St Lucia, Australia, 2004.

R. Ávila, L. R. Prado, and E. L. González, Dimensiones antropométricas de la población latinoamericana, 2nd ed. Guadalajara, México: Universidad de Guadalajara, Centro de investigaciones en ergonomia, 2007.

J. Park, “Design of the second spine: a secondary pathway to transfer loads from the shoulders to the pelvis,” in ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, Oregon, USA, 2013, pp. 4–7.

(2018) Materials information resource. Material Property Data. Accessed May. 2019. [Online]. Available: https://bit.ly/2WWRqbI

(2018) Proffessional 3D printing made accesible. materials. Ultimaker. Accessed May. 2019. [Online]. Available: https: //bit.ly/2Y4o1cd

F. Multon and A. H. Olivier, “Biomechanics of walking in real world: Naturalness we wish to reach in virtual reality,” in Human Walking in Virtual Environments: Perception, Technology, Applications, F. Steinicke, Y. Visell, J. Campos, and A. Lécuyer, Eds. New York, USA: Springer, 2013, pp. 55–77.




DOI: https://doi.org/10.17533/udea.redin.20190734 Abstract : 196 PDF : 147

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Esta publicación hace parte del Sistema de Revistas de la Universidad de Antioquia
¿Quieres aprender a usar el Open Journal system? Ingresa al Curso virtual
Este sistema es administrado por el Programa Integración de Tecnologías a la Docencia
Universidad de Antioquia
Powered by Public Knowledge Project